diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 6776dbf..904e7ea 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -40,6 +40,7 @@
 #include <command.h>
 #include <malloc.h>
 #include <post.h>
+#include <serial.h>
 
 #include <linux/types.h>
 #include <linux/string.h>	/* for strdup */
@@ -468,6 +469,13 @@
 	return (0);
 }
 
+struct serial_device * default_serial_console (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	return gd->do_mdm_init ? &serial_scc_device : &serial_smc_device;
+}
+
 static void kbd_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
index 453e4bb..661fbab 100644
--- a/board/mx1ads/mx1ads.c
+++ b/board/mx1ads/mx1ads.c
@@ -23,9 +23,9 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
-#include <mc9328.h>
+/*#include <mc9328.h>*/
+#include <asm/arch-arm920t/imx-regs.h>
 
 /* ------------------------------------------------------------------------- */
 
@@ -67,7 +67,6 @@
  * Miscellaneous platform dependent initialisations
  */
 
-
 void SetAsynchMode(void) {
 	__asm__ (
 		"mrc p15,0,r0,c1,c0,0 \n"
@@ -85,42 +84,34 @@
 
 	volatile unsigned int  tmp;
 
-	mc9328sid	= MX1_SIDR;
+	mc9328sid	= SIDR;
 
-	MX1_GPCR 	= 0x000003AB;		/* I/O pad driving strength 	*/
+	GPCR 		= 0x000003AB;		/* I/O pad driving strength 	*/
 
 /*	MX1_CS1U 	= 0x00000A00;	*/	/* SRAM initialization 		*/
 /*	MX1_CS1L 	= 0x11110601; 	*/
 
-	MX1_MPCTL0 	= 0x04632410;	/* setting for 150 MHz MCU PLL CLK	*/
-
-/*	MX1_MPCTL0 	= 0x003f1437;	*/ /* setting for 192 MHz MCU PLL CLK	*/
+	MPCTL0 		= 0x04632410;	/* setting for 150 MHz MCU PLL CLK	*/
 
 /* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
  * BCLK divider to 2 (i.e. BCLK to 48 MHz)
  */
-	MX1_CSCR 	= 0xAF000403;
+	CSCR 	= 0xAF000403;
 
-	MX1_CSCR 	|= 0x00200000;   	/* Trigger the restart bit(bit 21)	*/
-	MX1_CSCR 	&= 0xFFFF7FFF;		/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
+	CSCR 	|= 0x00200000;   	/* Trigger the restart bit(bit 21)	*/
+	CSCR 	&= 0xFFFF7FFF;		/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
 
 /* setup cs4 for cs8900 ethernet */
 
-	MX1_CS4U	= 0x00000F00;	/* Initialize CS4 for CS8900 ethernet 	*/
-	MX1_CS4L	= 0x00001501;
+	CS4U	= 0x00000F00;	/* Initialize CS4 for CS8900 ethernet 	*/
+	CS4L	= 0x00001501;
 
-	MX1_GIUS_A	&= 0xFF3FFFFF;
-	MX1_GPR_A	&= 0xFF3FFFFF;
+	GIUS(0)	&= 0xFF3FFFFF;
+	GPR(0)	&= 0xFF3FFFFF;
 
 	tmp = *(unsigned int *)(0x1500000C);
 	tmp = *(unsigned int *)(0x1500000C);
 
-/* setup timer 1 as system timer  	*/
-
-	MX1_TPRER1	= 0x1f;		/* divide by 32 		*/
-	MX1_TCTL1	= 0x19;		/* clock in from 32k Osc.	*/
-
-
 	SetAsynchMode();
 
 	gd->bd->bi_arch_number = 160;	/* Arch number of MX1ADS Board 		*/
@@ -131,19 +122,19 @@
 	dcache_enable();
 
 /* set PERCLKs				*/
-	MX1_PCDR = 0x00000055;     	/* set PERCLKS				*/
+	PCDR = 0x00000055;     	/* set PERCLKS				*/
 
 /* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
  * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
  * all sources selected as normal interrupt
  */
-	MX1_INTTYPEH = 0;
-	MX1_INTTYPEL = 0;
 
+/*	MX1_INTTYPEH = 0;
+	MX1_INTTYPEL = 0;
+*/
 	return 0;
 }
 
-
 int board_late_init(void) {
 
 	setenv("stdout", "serial");
@@ -163,13 +154,10 @@
 		default :
 			printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid);
 			break;
-
 	}
-
 	return 0;
 }
 
-
 int dram_init (void) {
 	DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
index 09fc0f8..eb7fde5 100644
--- a/board/mx1ads/syncflash.c
+++ b/board/mx1ads/syncflash.c
@@ -24,7 +24,8 @@
  */
 
 #include <common.h>
-#include <mc9328.h>
+/*#include <mc9328.h>*/
+#include <asm/arch/imx-regs.h>
 
 typedef unsigned long * p_u32;
 
@@ -33,27 +34,26 @@
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /*  Following Setting is for CSD1	*/
-#define SFCTL		0x00221004
-#define reg_SFCTL	__REG(SFCTL)
+#define SFCTL			0x00221004
+#define reg_SFCTL		__REG(SFCTL)
 
-#define SYNCFLASH_A10	(0x00100000)
+#define SYNCFLASH_A10		(0x00100000)
 
-#define CMD_NORMAL	(0x81020300)			/* Normal Mode			*/
-#define CMD_PREC	(CMD_NORMAL + 0x10000000) 	/* Precharge Command		*/
-#define CMD_AUTO	(CMD_NORMAL + 0x20000000) 	/* Auto Refresh Command		*/
-#define CMD_LMR		(CMD_NORMAL + 0x30000000) 	/* Load Mode Register Command 	*/
-#define CMD_LCR		(CMD_NORMAL + 0x60000000) 	/* LCR Command			*/
-#define CMD_PROGRAM	(CMD_NORMAL + 0x70000000)
+#define CMD_NORMAL		(0x81020300)			/* Normal Mode			*/
+#define CMD_PREC		(CMD_NORMAL + 0x10000000) 	/* Precharge Command		*/
+#define CMD_AUTO		(CMD_NORMAL + 0x20000000) 	/* Auto Refresh Command		*/
+#define CMD_LMR			(CMD_NORMAL + 0x30000000) 	/* Load Mode Register Command 	*/
+#define CMD_LCR			(CMD_NORMAL + 0x60000000) 	/* LCR Command			*/
+#define CMD_PROGRAM		(CMD_NORMAL + 0x70000000)
 
-#define MODE_REG_VAL	(CFG_FLASH_BASE+0x0008CC00) 	/* Cas Latency 3		*/
+#define MODE_REG_VAL		(CFG_FLASH_BASE+0x0008CC00) 	/* Cas Latency 3		*/
 
 /* LCR Command */
-#define LCR_READSTATUS		(0x0001C000)		/* 0x70				*/
-#define LCR_ERASE_CONFIRM	(0x00008000)		/* 0x20				*/
-#define LCR_ERASE_NVMODE	(0x0000C000)		/* 0x30				*/
-#define LCR_PROG_NVMODE		(0x00028000)		/* 0xA0				*/
-#define LCR_SR_CLEAR		(0x00014000)		/* 0x50				*/
-
+#define LCR_READSTATUS		(0x0001C000)			/* 0x70				*/
+#define LCR_ERASE_CONFIRM	(0x00008000)			/* 0x20				*/
+#define LCR_ERASE_NVMODE	(0x0000C000)			/* 0x30				*/
+#define LCR_PROG_NVMODE		(0x00028000)			/* 0xA0				*/
+#define LCR_SR_CLEAR		(0x00014000)			/* 0x50				*/
 
 /* Get Status register 			*/
 u32 SF_SR(void) {
@@ -82,7 +82,6 @@
 
 	if ((tmp & 0x00000080) && (tmp & 0x0000001C)) {
 		printf ("SyncFlash Error code %08x\n",tmp);
-
 	};
 
 	if (tmp == 0x00800080) 		/* Test Bit 7 of SR	*/
@@ -98,7 +97,6 @@
 
 	reg_SFCTL	= CMD_PREC;			/* Set Precharge Command 	*/
 	tmp 		= __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
-
 }
 
 /* set SyncFlash to normal mode			*/
@@ -128,7 +126,6 @@
 	while(!SF_Ready());
 }
 
-
 void SF_NvmodeErase(void) {
 	SF_PrechargeAll();
 
@@ -149,10 +146,8 @@
 
 	reg_SFCTL	= CMD_NORMAL;			/* Return to Normal mode 	*/
 	__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; 	/* Confirm not needed 	*/
-
 }
 
-
 /****************************************************************************************/
 
 ulong flash_init(void) {
@@ -195,7 +190,6 @@
 	return FLASH_BANK_SIZE;
 }
 
-
 void flash_print_info (flash_info_t *info) {
 
 	int i;
@@ -209,7 +203,6 @@
 			break;
 	}
 
-
 	switch (info->flash_id & FLASH_TYPEMASK) {
 		case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
 			printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
@@ -236,7 +229,6 @@
 	printf ("\n");
 }
 
-
 /*-----------------------------------------------------------------------*/
 
 int flash_erase (flash_info_t *info, int s_first, int s_last) {
diff --git a/board/mx1ads/u-boot.lds b/board/mx1ads/u-boot.lds
index 53743cd..649216a 100644
--- a/board/mx1ads/u-boot.lds
+++ b/board/mx1ads/u-boot.lds
@@ -23,7 +23,6 @@
  * MA 02111-1307 USA
  */
 
-
 OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
 OUTPUT_ARCH(arm)
 ENTRY(_start)
@@ -34,7 +33,7 @@
 	. = ALIGN(4);
 	.text      :
 	{
-	  cpu/mc9328/start.o	(.text)
+	  cpu/arm920t/start.o	(.text)
 	  *(.text)
 	}
 
diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile
new file mode 100644
index 0000000..86aef5c
--- /dev/null
+++ b/board/mx1fs2/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= mx1fs2.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mx1fs2/config.mk b/board/mx1fs2/config.mk
new file mode 100644
index 0000000..59ab542
--- /dev/null
+++ b/board/mx1fs2/config.mk
@@ -0,0 +1,10 @@
+#
+# This config file is used for compilation of IMX sources
+#
+# You might change location of U-Boot in memory by setting right TEXT_BASE.
+# This allows for example having one copy located at the end of ram and stored
+# in flash device and later on while developing use other location to test
+# the code in RAM device only.
+#
+
+TEXT_BASE = 0x08f00000
diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c
new file mode 100644
index 0000000..3a79a9e
--- /dev/null
+++ b/board/mx1fs2/flash.c
@@ -0,0 +1,914 @@
+/*
+ * (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) 2003 August Hoeraendl, Logotronic GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#undef CONFIG_FLASH_16BIT
+
+#include <common.h>
+
+#if defined CFG_JFFS_CUSTOM_PART
+#include <jffs2/jffs2.h>
+#endif
+
+#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE
+#define MAIN_SECT_SIZE  MX1FS2_FLASH_SECT_SIZE
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips   */
+
+/*
+ * NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
+ *        has nothing to do with the flash chip being 8-bit or 16-bit.
+ */
+#ifdef CONFIG_FLASH_16BIT
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+
+#define	FLASH_ID_MASK	0xFFFF
+#else
+typedef unsigned long FLASH_PORT_WIDTH;
+typedef volatile unsigned long FLASH_PORT_WIDTHV;
+
+#define	FLASH_ID_MASK	0xFFFFFFFF
+#endif
+
+#define FPW	FLASH_PORT_WIDTH
+#define FPWV	FLASH_PORT_WIDTHV
+
+#define ORMASK(size) ((-size) & OR_AM_MSK)
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+#if 0
+static ulong flash_get_size(FPWV * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+#endif
+static void flash_reset(flash_info_t * info);
+static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data);
+static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
+#define write_word(in, de, da)   write_word_amd(in, de, da)
+#ifdef CFG_FLASH_PROTECTION
+static void flash_sync_real_protect(flash_info_t * info);
+#endif
+
+#if defined CFG_JFFS_CUSTOM_PART
+
+/**
+ * jffs2_part_info - get information about a JFFS2 partition
+ *
+ * @part_num: number of the partition you want to get info about
+ * @return:   struct part_info* in case of success, 0 if failure
+ */
+
+static struct part_info part;
+static int current_part = -1;
+
+struct part_info *
+jffs2_part_info(int part_num)
+{
+	void *jffs2_priv_saved = part.jffs2_priv;
+
+	printf("jffs2_part_info: part_num=%i\n", part_num);
+
+	if (current_part == part_num)
+		return &part;
+
+	/* rootfs                                                 */
+	if (part_num == 0) {
+		memset(&part, 0, sizeof (part));
+
+		part.offset = (char *) MX1FS2_JFFS2_PART0_START;
+		part.size = MX1FS2_JFFS2_PART0_SIZE;
+
+		/* Mark the struct as ready */
+		current_part = part_num;
+
+		printf("part.offset = 0x%08x\n", (unsigned int) part.offset);
+		printf("part.size   = 0x%08x\n", (unsigned int) part.size);
+	}
+
+	/* userfs                                    */
+	if (part_num == 1) {
+		memset(&part, 0, sizeof (part));
+
+		part.offset = (char *) MX1FS2_JFFS2_PART1_START;
+		part.size = MX1FS2_JFFS2_PART1_SIZE;
+
+		/* Mark the struct as ready */
+		current_part = part_num;
+
+		printf("part.offset = 0x%08x\n", (unsigned int) part.offset);
+		printf("part.size   = 0x%08x\n", (unsigned int) part.size);
+	}
+
+	if (current_part == part_num) {
+		part.usr_priv = &current_part;
+		part.jffs2_priv = jffs2_priv_saved;
+		return &part;
+	}
+
+	printf("jffs2_part_info: end of partition table\n");
+	return 0;
+}
+#endif				/* CFG_JFFS_CUSTOM_PART */
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+ulong
+flash_init(void)
+{
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+		flash_info[i].flash_id =
+		    (FLASH_MAN_AMD & FLASH_VENDMASK) |
+		    (FLASH_AM640U & FLASH_TYPEMASK);
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		switch (i) {
+		case 0:
+			flashbase = MX1FS2_FLASH_BASE;
+			break;
+		default:
+			panic("configured too many flash banks!\n");
+			break;
+		}
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_FLASH_BASE,
+		      CFG_FLASH_BASE + _bss_start - _armboot_start,
+		      &flash_info[0]);
+
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void
+flash_reset(flash_info_t * info)
+{
+	FPWV *base = (FPWV *) (info->start[0]);
+
+	/* Put FLASH back in read mode */
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
+		*base = (FPW) 0x00FF00FF;	/* Intel Read Mode */
+	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
+		*base = (FPW) 0x00F000F0;	/* AMD Read Mode */
+}
+
+/*-----------------------------------------------------------------------
+ */
+#if 0
+static void
+flash_get_offsets(ulong base, flash_info_t * info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
+	    && (info->flash_id & FLASH_BTYPE)) {
+		int bootsect_size;	/* number of bytes/boot sector  */
+		int sect_size;	/* number of bytes/regular sector */
+
+		bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
+		sect_size = 0x00010000 * (sizeof (FPW) / 2);
+
+		/* set sector offsets for bottom boot block type        */
+		for (i = 0; i < 8; ++i) {
+			info->start[i] = base + (i * bootsect_size);
+		}
+		for (i = 8; i < info->sector_count; i++) {
+			info->start[i] = base + ((i - 7) * sect_size);
+		}
+	} else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
+		   && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
+
+		int sect_size;	/* number of bytes/sector */
+
+		sect_size = 0x00010000 * (sizeof (FPW) / 2);
+
+		/* set up sector start address table (uniform sector type) */
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * sect_size);
+	}
+}
+#endif /* 0 */
+
+/*-----------------------------------------------------------------------
+ */
+
+void
+flash_print_info(flash_info_t * info)
+{
+	int i;
+	uchar *boottype;
+	uchar *bootletter;
+	uchar *fmt;
+	uchar botbootletter[] = "B";
+	uchar topbootletter[] = "T";
+	uchar botboottype[] = "bottom boot sector";
+	uchar topboottype[] = "top boot sector";
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf("AMD ");
+		break;
+	case FLASH_MAN_BM:
+		printf("BRIGHT MICRO ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf("FUJITSU ");
+		break;
+	case FLASH_MAN_SST:
+		printf("SST ");
+		break;
+	case FLASH_MAN_STM:
+		printf("STM ");
+		break;
+	case FLASH_MAN_INTEL:
+		printf("INTEL ");
+		break;
+	default:
+		printf("Unknown Vendor ");
+		break;
+	}
+
+	/* check for top or bottom boot, if it applies */
+	if (info->flash_id & FLASH_BTYPE) {
+		boottype = botboottype;
+		bootletter = botbootletter;
+	} else {
+		boottype = topboottype;
+		bootletter = topbootletter;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM640U:
+		fmt = "29LV641D (64 Mbit, uniform sectors)\n";
+		break;
+	case FLASH_28F800C3B:
+	case FLASH_28F800C3T:
+		fmt = "28F800C3%s (8 Mbit, %s)\n";
+		break;
+	case FLASH_INTEL800B:
+	case FLASH_INTEL800T:
+		fmt = "28F800B3%s (8 Mbit, %s)\n";
+		break;
+	case FLASH_28F160C3B:
+	case FLASH_28F160C3T:
+		fmt = "28F160C3%s (16 Mbit, %s)\n";
+		break;
+	case FLASH_INTEL160B:
+	case FLASH_INTEL160T:
+		fmt = "28F160B3%s (16 Mbit, %s)\n";
+		break;
+	case FLASH_28F320C3B:
+	case FLASH_28F320C3T:
+		fmt = "28F320C3%s (32 Mbit, %s)\n";
+		break;
+	case FLASH_INTEL320B:
+	case FLASH_INTEL320T:
+		fmt = "28F320B3%s (32 Mbit, %s)\n";
+		break;
+	case FLASH_28F640C3B:
+	case FLASH_28F640C3T:
+		fmt = "28F640C3%s (64 Mbit, %s)\n";
+		break;
+	case FLASH_INTEL640B:
+	case FLASH_INTEL640T:
+		fmt = "28F640B3%s (64 Mbit, %s)\n";
+		break;
+	default:
+		fmt = "Unknown Chip Type\n";
+		break;
+	}
+
+	printf(fmt, bootletter, boottype);
+
+	printf("  Size: %ld MB in %d Sectors\n",
+	       info->size >> 20, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0) {
+			printf("\n   ");
+		}
+
+		printf(" %08lX%s", info->start[i],
+		       info->protect[i] ? " (RO)" : "     ");
+	}
+
+	printf("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+#if 0
+ulong
+flash_get_size(FPWV * addr, flash_info_t * info)
+{
+	/* Write auto select command: read Manufacturer ID */
+
+	/* Write auto select command sequence and test FLASH answer */
+	addr[0x0555] = (FPW) 0x00AA00AA;	/* for AMD, Intel ignores this */
+	addr[0x02AA] = (FPW) 0x00550055;	/* for AMD, Intel ignores this */
+	addr[0x0555] = (FPW) 0x00900090;	/* selects Intel or AMD */
+
+	/* The manufacturer codes are only 1 byte, so just use 1 byte.
+	 * This works for any bus width and any FLASH device width.
+	 */
+	switch (addr[0] & 0xff) {
+
+	case (uchar) AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+
+	case (uchar) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		break;
+	}
+
+	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
+	if (info->flash_id != FLASH_UNKNOWN)
+		switch (addr[1]) {
+
+		case (FPW) AMD_ID_LV640U:	/* 29LV640 and 29LV641 have same ID */
+			info->flash_id += FLASH_AM640U;
+			info->sector_count = 128;
+			info->size = 0x00800000 * (sizeof (FPW) / 2);
+			break;	/* => 8 or 16 MB        */
+
+		case (FPW) INTEL_ID_28F800C3B:
+			info->flash_id += FLASH_28F800C3B;
+			info->sector_count = 23;
+			info->size = 0x00100000 * (sizeof (FPW) / 2);
+			break;	/* => 1 or 2 MB         */
+
+		case (FPW) INTEL_ID_28F800B3B:
+			info->flash_id += FLASH_INTEL800B;
+			info->sector_count = 23;
+			info->size = 0x00100000 * (sizeof (FPW) / 2);
+			break;	/* => 1 or 2 MB         */
+
+		case (FPW) INTEL_ID_28F160C3B:
+			info->flash_id += FLASH_28F160C3B;
+			info->sector_count = 39;
+			info->size = 0x00200000 * (sizeof (FPW) / 2);
+			break;	/* => 2 or 4 MB         */
+
+		case (FPW) INTEL_ID_28F160B3B:
+			info->flash_id += FLASH_INTEL160B;
+			info->sector_count = 39;
+			info->size = 0x00200000 * (sizeof (FPW) / 2);
+			break;	/* => 2 or 4 MB         */
+
+		case (FPW) INTEL_ID_28F320C3B:
+			info->flash_id += FLASH_28F320C3B;
+			info->sector_count = 71;
+			info->size = 0x00400000 * (sizeof (FPW) / 2);
+			break;	/* => 4 or 8 MB         */
+
+		case (FPW) INTEL_ID_28F320B3B:
+			info->flash_id += FLASH_INTEL320B;
+			info->sector_count = 71;
+			info->size = 0x00400000 * (sizeof (FPW) / 2);
+			break;	/* => 4 or 8 MB         */
+
+		case (FPW) INTEL_ID_28F640C3B:
+			info->flash_id += FLASH_28F640C3B;
+			info->sector_count = 135;
+			info->size = 0x00800000 * (sizeof (FPW) / 2);
+			break;	/* => 8 or 16 MB        */
+
+		case (FPW) INTEL_ID_28F640B3B:
+			info->flash_id += FLASH_INTEL640B;
+			info->sector_count = 135;
+			info->size = 0x00800000 * (sizeof (FPW) / 2);
+			break;	/* => 8 or 16 MB        */
+
+		default:
+			info->flash_id = FLASH_UNKNOWN;
+			info->sector_count = 0;
+			info->size = 0;
+			return (0);	/* => no or unknown flash */
+		}
+
+	flash_get_offsets((ulong) addr, info);
+
+	/* Put FLASH back in read mode */
+	flash_reset(info);
+
+	return (info->size);
+}
+#endif /* 0 */
+
+#ifdef CFG_FLASH_PROTECTION
+/*-----------------------------------------------------------------------
+ */
+
+static void
+flash_sync_real_protect(flash_info_t * info)
+{
+	FPWV *addr = (FPWV *) (info->start[0]);
+	FPWV *sect;
+	int i;
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F800C3B:
+	case FLASH_28F800C3T:
+	case FLASH_28F160C3B:
+	case FLASH_28F160C3T:
+	case FLASH_28F320C3B:
+	case FLASH_28F320C3T:
+	case FLASH_28F640C3B:
+	case FLASH_28F640C3T:
+		/* check for protected sectors */
+		*addr = (FPW) 0x00900090;
+		for (i = 0; i < info->sector_count; i++) {
+			/* read sector protection at sector address, (A7 .. A0) = 0x02.
+			 * D0 = 1 for each device if protected.
+			 * If at least one device is protected the sector is marked
+			 * protected, but mixed protected and  unprotected devices
+			 * within a sector should never happen.
+			 */
+			sect = (FPWV *) (info->start[i]);
+			info->protect[i] =
+			    (sect[2] & (FPW) (0x00010001)) ? 1 : 0;
+		}
+
+		/* Put FLASH back in read mode */
+		flash_reset(info);
+		break;
+
+	case FLASH_AM640U:
+	default:
+		/* no hardware protect that we support */
+		break;
+	}
+}
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	FPWV *addr;
+	int flag, prot, sect;
+	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
+	ulong start, now, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf("- missing\n");
+		} else {
+			printf("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_INTEL800B:
+	case FLASH_INTEL160B:
+	case FLASH_INTEL320B:
+	case FLASH_INTEL640B:
+	case FLASH_28F800C3B:
+	case FLASH_28F160C3B:
+	case FLASH_28F320C3B:
+	case FLASH_28F640C3B:
+	case FLASH_AM640U:
+		break;
+	case FLASH_UNKNOWN:
+	default:
+		printf("Can't erase unknown flash type %08lx - aborted\n",
+		       info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	} else {
+		printf("\n");
+	}
+
+	start = get_timer(0);
+	last = start;
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
+
+		if (info->protect[sect] != 0)	/* protected, skip it */
+			continue;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr = (FPWV *) (info->start[sect]);
+		if (intel) {
+			*addr = (FPW) 0x00500050;	/* clear status register */
+			*addr = (FPW) 0x00200020;	/* erase setup */
+			*addr = (FPW) 0x00D000D0;	/* erase confirm */
+		} else {
+			/* must be AMD style if not Intel */
+			FPWV *base;	/* first address in bank */
+
+			base = (FPWV *) (info->start[0]);
+			base[0x0555] = (FPW) 0x00AA00AA;	/* unlock */
+			base[0x02AA] = (FPW) 0x00550055;	/* unlock */
+			base[0x0555] = (FPW) 0x00800080;	/* erase mode */
+			base[0x0555] = (FPW) 0x00AA00AA;	/* unlock */
+			base[0x02AA] = (FPW) 0x00550055;	/* unlock */
+			*addr = (FPW) 0x00300030;	/* erase sector */
+		}
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* wait at least 50us for AMD, 80us for Intel.
+		 * Let's wait 1 ms.
+		 */
+		udelay(1000);
+
+		while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
+			if ((now = get_timer(0)) - start > CFG_FLASH_ERASE_TOUT) {
+				printf("Timeout\n");
+
+				if (intel) {
+					/* suspend erase        */
+					*addr = (FPW) 0x00B000B0;
+				}
+
+				flash_reset(info);	/* reset to read mode */
+				rcode = 1;	/* failed */
+				break;
+			}
+
+			/* show that we're waiting */
+			if ((now - last) > 1000) {	/* every second */
+				putc('.');
+				last = now;
+			}
+		}
+
+		flash_reset(info);	/* reset to read mode   */
+	}
+
+	printf(" done\n");
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int
+bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	FPW data = 0;		/* 16 or 32 bit word, matches flash bus width on MPC8XX */
+	int bytes;		/* number of bytes to program in current word         */
+	int left;		/* number of bytes left to program                    */
+	int i, res;
+
+	for (left = cnt, res = 0;
+	     left > 0 && res == 0;
+	     addr += sizeof (data), left -= sizeof (data) - bytes) {
+
+		bytes = addr & (sizeof (data) - 1);
+		addr &= ~(sizeof (data) - 1);
+
+		/* combine source and destination data so can program
+		 * an entire word of 16 or 32 bits
+		 */
+		for (i = 0; i < sizeof (data); i++) {
+			data <<= 8;
+			if (i < bytes || i - bytes >= left)
+				data += *((uchar *) addr + i);
+			else
+				data += *src++;
+		}
+
+		/* write one word to the flash */
+		switch (info->flash_id & FLASH_VENDMASK) {
+		case FLASH_MAN_AMD:
+			res = write_word_amd(info, (FPWV *) addr, data);
+			break;
+		case FLASH_MAN_INTEL:
+			res = write_word_intel(info, (FPWV *) addr, data);
+			break;
+		default:
+			/* unknown flash type, error! */
+			printf("missing or unknown FLASH type\n");
+			res = 1;	/* not really a timeout, but gives error */
+			break;
+		}
+	}
+
+	return (res);
+}
+
+/**
+ * write_buf: - Copy memory to flash.
+ *
+ * @param info:
+ * @param src:	source of copy transaction
+ * @param addr:	where to copy to
+ * @param cnt: 	number of bytes to copy
+ *
+ * @return	error code
+ */
+
+int
+write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	FPW data;
+	int l;
+	int i, rc;
+
+	wp = (addr & ~1);	/* get lower word aligned address */
+
+	/* handle unaligned start bytes */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+		for (; i < 2 && cnt > 0; ++i) {
+			data = (data >> 8) | (*src++ << 8);
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 2; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+
+		if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 2;
+	}
+
+	/* handle word aligned part */
+	while (cnt >= 2) {
+		/* data = *((vushort*)src); */
+		data = *((FPW *) src);
+		if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
+			return (rc);
+		}
+		src += sizeof (FPW);
+		wp += sizeof (FPW);
+		cnt -= sizeof (FPW);
+	}
+
+	if (cnt == 0)
+		return ERR_OK;
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 8);
+		--cnt;
+	}
+	for (; i < 2; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *) cp << 8);
+	}
+
+	return write_word(info, (FPWV *)wp, data);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for AMD FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_word_amd(flash_info_t * info, FPWV * dest, FPW data)
+{
+	ulong start;
+	int flag;
+	int res = 0;		/* result, assume success       */
+	FPWV *base;		/* first address in flash bank  */
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*dest & data) != data) {
+		return (2);
+	}
+
+	base = (FPWV *) (info->start[0]);
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	base[0x0555] = (FPW) 0x00AA00AA;	/* unlock */
+	base[0x02AA] = (FPW) 0x00550055;	/* unlock */
+	base[0x0555] = (FPW) 0x00A000A0;	/* selects program mode */
+
+	*dest = data;		/* start programming the data   */
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	start = get_timer(0);
+
+	/* data polling for D7 */
+	while (res == 0
+	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
+		if (get_timer(0) - start > CFG_FLASH_WRITE_TOUT) {
+			*dest = (FPW) 0x00F000F0;	/* reset bank */
+			printf("SHA timeout\n");
+			res = 1;
+		}
+	}
+
+	return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for Intel FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
+{
+	ulong start;
+	int flag;
+	int res = 0;		/* result, assume success       */
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*dest & data) != data) {
+		return (2);
+	}
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	*dest = (FPW) 0x00500050;	/* clear status register        */
+	*dest = (FPW) 0x00FF00FF;	/* make sure in read mode       */
+	*dest = (FPW) 0x00400040;	/* program setup                */
+
+	*dest = data;		/* start programming the data   */
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	start = get_timer(0);
+
+	while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			*dest = (FPW) 0x00B000B0;	/* Suspend program      */
+			res = 1;
+		}
+	}
+
+	if (res == 0 && (*dest & (FPW) 0x00100010))
+		res = 1;	/* write failed, time out error is close enough */
+
+	*dest = (FPW) 0x00500050;	/* clear status register        */
+	*dest = (FPW) 0x00FF00FF;	/* make sure in read mode       */
+
+	return (res);
+}
+
+#ifdef CFG_FLASH_PROTECTION
+/*-----------------------------------------------------------------------
+ */
+int
+flash_real_protect(flash_info_t * info, long sector, int prot)
+{
+	int rcode = 0;		/* assume success */
+	FPWV *addr;		/* address of sector */
+	FPW value;
+
+	addr = (FPWV *) (info->start[sector]);
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F800C3B:
+	case FLASH_28F800C3T:
+	case FLASH_28F160C3B:
+	case FLASH_28F160C3T:
+	case FLASH_28F320C3B:
+	case FLASH_28F320C3T:
+	case FLASH_28F640C3B:
+	case FLASH_28F640C3T:
+		flash_reset(info);	/* make sure in read mode */
+		*addr = (FPW) 0x00600060L;	/* lock command setup */
+		if (prot)
+			*addr = (FPW) 0x00010001L;	/* lock sector */
+		else
+			*addr = (FPW) 0x00D000D0L;	/* unlock sector */
+		flash_reset(info);	/* reset to read mode */
+
+		/* now see if it really is locked/unlocked as requested */
+		*addr = (FPW) 0x00900090;
+		/* read sector protection at sector address, (A7 .. A0) = 0x02.
+		 * D0 = 1 for each device if protected.
+		 * If at least one device is protected the sector is marked
+		 * protected, but return failure. Mixed protected and
+		 * unprotected devices within a sector should never happen.
+		 */
+		value = addr[2] & (FPW) 0x00010001;
+		if (value == 0)
+			info->protect[sector] = 0;
+		else if (value == (FPW) 0x00010001)
+			info->protect[sector] = 1;
+		else {
+			/* error, mixed protected and unprotected */
+			rcode = 1;
+			info->protect[sector] = 1;
+		}
+		if (info->protect[sector] != prot)
+			rcode = 1;	/* failed to protect/unprotect as requested */
+
+		/* reload all protection bits from hardware for now */
+		flash_sync_real_protect(info);
+		break;
+
+	case FLASH_AM640U:
+	default:
+		/* no hardware protect that we support */
+		info->protect[sector] = prot;
+		break;
+	}
+
+	return rcode;
+}
+#endif
diff --git a/board/mx1fs2/intel.h b/board/mx1fs2/intel.h
new file mode 100644
index 0000000..8db5dd4
--- /dev/null
+++ b/board/mx1fs2/intel.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2002 ETC s.r.o.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Written by Marcel Telka <marcel@telka.sk>, 2002.
+ *
+ * Documentation:
+ * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
+ *     28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
+ * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
+ *     28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
+ *
+ * This file is taken from OpenWinCE project hosted by SourceForge.net
+ *
+ */
+
+#ifndef	FLASH_INTEL_H
+#define	FLASH_INTEL_H
+
+#include <common.h>
+
+/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
+
+#define	CFI_INTEL_CMD_READ_ARRAY		0xFF	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_READ_IDENTIFIER		0x90	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_READ_QUERY		0x98	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_READ_STATUS_REGISTER	0x70	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_CLEAR_STATUS_REGISTER	0x50	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_PROGRAM1			0x40	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_PROGRAM2			0x10	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_WRITE_TO_BUFFER		0xE8	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_CONFIRM			0xD0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_BLOCK_ERASE		0x20	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_SUSPEND			0xB0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_RESUME			0xD0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_LOCK_SETUP		0x60	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_LOCK_BLOCK		0x01	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_UNLOCK_BLOCK		0xD0	/* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_LOCK_DOWN_BLOCK		0x2F	/* 28FxxxK3, 28FxxxK18 */
+
+/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
+
+#define	CFI_INTEL_SR_READY			1 << 7	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_ERASE_SUSPEND		1 << 6	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_ERASE_ERROR		1 << 5	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_PROGRAM_ERROR		1 << 4	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_VPEN_ERROR			1 << 3	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_PROGRAM_SUSPEND		1 << 2	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_BLOCK_LOCKED		1 << 1	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_BEFP			1 << 0	/* 28FxxxK3, 28FxxxK18 */
+
+/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
+
+#define	CFI_CHIP_INTEL_28F320J3A		0x0016
+#define	CFI_CHIPN_INTEL_28F320J3A		"28F320J3A"
+#define	CFI_CHIP_INTEL_28F640J3A		0x0017
+#define	CFI_CHIPN_INTEL_28F640J3A		"28F640J3A"
+#define	CFI_CHIP_INTEL_28F128J3A		0x0018
+#define	CFI_CHIPN_INTEL_28F128J3A		"28F128J3A"
+
+/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
+
+#define	CFI_CHIP_INTEL_28F640K3			0x8801
+#define	CFI_CHIPN_INTEL_28F640K3		"28F640K3"
+#define	CFI_CHIP_INTEL_28F128K3			0x8802
+#define	CFI_CHIPN_INTEL_28F128K3		"28F128K3"
+#define	CFI_CHIP_INTEL_28F256K3			0x8803
+#define	CFI_CHIPN_INTEL_28F256K3		"28F256K3"
+#define	CFI_CHIP_INTEL_28F640K18		0x8805
+#define	CFI_CHIPN_INTEL_28F640K18		"28F640K18"
+#define	CFI_CHIP_INTEL_28F128K18		0x8806
+#define	CFI_CHIPN_INTEL_28F128K18		"28F128K18"
+#define	CFI_CHIP_INTEL_28F256K18		0x8807
+#define	CFI_CHIPN_INTEL_28F256K18		"28F256K18"
+
+#endif				/* FLASH_INTEL_H */
diff --git a/board/mx1fs2/memsetup.S b/board/mx1fs2/memsetup.S
new file mode 100644
index 0000000..5ec751b
--- /dev/null
+++ b/board/mx1fs2/memsetup.S
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/imx-regs.h>
+
+.globl memsetup
+memsetup:
+
+	mov	r10, lr
+
+/* Change PERCLK1DIV to 14 ie 14+1 */
+	ldr		r0,	=PCDR
+	ldr		r1,	=CFG_PCDR_VAL
+	str		r1,   [r0]
+
+/* set MCU PLL Control Register 0 */
+
+	ldr		r0,	=MPCTL0
+	ldr		r1,	=CFG_MPCTL0_VAL
+	str		r1,   [r0]
+
+/* set MCU PLL Control Register 1 */
+
+	ldr		r0,	=MPCTL1
+	ldr		r1,	=CFG_MPCTL1_VAL
+	str		r1,   [r0]
+
+/* set mpll restart bit */
+	ldr		r0, =CSCR
+	ldr		r1, [r0]
+	orr		r1,r1,#(1<<21)
+	str		r1, [r0]
+
+	mov		r2,#0x10
+1:
+	mov		r3,#0x2000
+2:
+	subs	r3,r3,#1
+	bne		2b
+
+	subs	r2,r2,#1
+	bne		1b
+
+/* set System PLL Control Register 0 */
+
+	ldr		r0,	=SPCTL0
+	ldr		r1,	=CFG_SPCTL0_VAL
+	str		r1,   [r0]
+
+/* set System PLL Control Register 1 */
+
+	ldr		r0,	=SPCTL1
+	ldr		r1,	=CFG_SPCTL1_VAL
+	str		r1,   [r0]
+
+/* set spll restart bit */
+	ldr		r0, =CSCR
+	ldr		r1, [r0]
+	orr		r1,r1,#(1<<22)
+	str		r1, [r0]
+
+	mov		r2,#0x10
+1:
+	mov		r3,#0x2000
+2:
+	subs	r3,r3,#1
+	bne		2b
+
+	subs	r2,r2,#1
+	bne		1b
+
+	ldr		r0,   =CSCR
+	ldr		r1,   =CFG_CSCR_VAL
+	str		r1,   [r0]
+
+	ldr		r0,   =GPCR
+	ldr		r1,   =CFG_GPCR_VAL
+	str		r1,   [r0]
+
+/*
+ * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
+ * this.....
+ *
+ * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
+ * register 1, this stops it using the output of the PLL and thus runs at the
+ * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
+ * use the value set in the CM_OSC registers...regardless of what you set it
+ * too!  Thus, although i thought i was running at 140MHz, i'm actually running
+ * at 40!..
+ *
+ * Slapping this into my bootloader does the trick...
+ *
+ * MRC p15,0,r0,c1,c0,0    ; read core configuration register
+ * ORR r0,r0,#0xC0000000   ; set asynchronous clocks and not fastbus mode
+ * MCR p15,0,r0,c1,c0,0    ; write modified value to core configuration
+ * register
+ *
+ */
+	MRC p15,0,r0,c1,c0,0
+/*	ORR r0,r0,#0xC0000000 async mode */
+/*	ORR r0,r0,#0x40000000 sync mode */
+	ORR r0,r0,#0xC0000000
+	MCR p15,0,r0,c1,c0,0
+
+	ldr		r0,	=GIUS(0)
+	ldr		r1,	=CFG_GIUS_A_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=FMCR
+	ldr		r1,	=CFG_FMCR_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS0U
+	ldr		r1,	=CFG_CS0U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS0L
+	ldr		r1,	=CFG_CS0L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS1U
+	ldr		r1,	=CFG_CS1U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS1L
+	ldr		r1,	=CFG_CS1L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS4U
+	ldr		r1,	=CFG_CS4U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS4L
+	ldr		r1,	=CFG_CS4L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS5U
+	ldr		r1,	=CFG_CS5U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS5L
+	ldr		r1,	=CFG_CS5L_VAL
+	str		r1,   [r0]
+
+/* SDRAM Setup */
+
+	ldr  r1,=0x00221000   /* adr of SDCTRL0			*/
+	ldr  r0,=0x92120200
+	str  r0,[r1,#0]       /* put in precharge command mode    */
+	ldr  r2,=0x08200000   /* adr for precharge cmd 	   */
+	ldr  r0,[r2,#0]       /* precharge			   */
+	ldr  r0,=0xA2120200
+	ldr  r2,=0x08000000   /* start of SDRAM		   */
+	str  r0,[r1,#0]       /* put in auto-refresh mode	   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,=0xB2120200
+	ldr  r2,=0x08111800
+	str  r0,[r1,#0]       /* setup for mode register of SDRAM */
+	ldr  r0,[r2,#0]       /* program mode register 	   */
+	ldr  r0,=0x82124267
+	str  r0,[r1,#0]       /* back to normal operation	   */
+
+	mov	pc,r10
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
new file mode 100644
index 0000000..f51085a
--- /dev/null
+++ b/board/mx1fs2/mx1fs2.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#include <asm/arch/imx-regs.h>
+
+#define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
+
+extern void imx_gpio_mode(int gpio_mode);
+
+static void logo_init(void)
+{
+	imx_gpio_mode(PD15_PF_LD0);
+	imx_gpio_mode(PD16_PF_LD1);
+	imx_gpio_mode(PD17_PF_LD2);
+	imx_gpio_mode(PD18_PF_LD3);
+	imx_gpio_mode(PD19_PF_LD4);
+	imx_gpio_mode(PD20_PF_LD5);
+	imx_gpio_mode(PD21_PF_LD6);
+	imx_gpio_mode(PD22_PF_LD7);
+	imx_gpio_mode(PD23_PF_LD8);
+	imx_gpio_mode(PD24_PF_LD9);
+	imx_gpio_mode(PD25_PF_LD10);
+	imx_gpio_mode(PD26_PF_LD11);
+	imx_gpio_mode(PD27_PF_LD12);
+	imx_gpio_mode(PD28_PF_LD13);
+	imx_gpio_mode(PD29_PF_LD14);
+	imx_gpio_mode(PD30_PF_LD15);
+	imx_gpio_mode(PD14_PF_FLM_VSYNC);
+	imx_gpio_mode(PD13_PF_LP_HSYNC);
+	imx_gpio_mode(PD6_PF_LSCLK);
+	imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_GPIO);
+	imx_gpio_mode(PD11_PF_CONTRAST);
+	imx_gpio_mode(PD10_PF_SPL_SPR);
+
+	LCDC_RMCR = 0x00000000;
+	LCDC_PCR = PCR_COLOR | PCR_PBSIZ_8 | PCR_BPIX_16 | PCR_PCD(5);
+	LCDC_HCR = HCR_H_WIDTH(2);
+	LCDC_VCR = VCR_V_WIDTH(2);
+
+	LCDC_PWMR = 0x00000380;   /* contrast to 0x80 middle (is best !!!) */
+	LCDC_SSA  = 0x10040000;   /* image in flash */
+
+	LCDC_SIZE = SIZE_XMAX(320) | SIZE_YMAX(240);   /* screen size */
+
+	LCDC_VPW  = 0x000000A0;   /* Virtual Page Width Register */
+	LCDC_POS  = 0x00000000;   /* panning offset 0 (0 pixel offset) */
+
+	/* disable Cursor */
+	LCDC_CPOS  = 0x00000000;
+
+	/* fixed burst length */
+	LCDC_DMACR = DMACR_BURST | DMACR_HM(8) | DMACR_TM(2);
+
+	/* enable LCD */
+	DR(3)   |= 0x00001000;
+	LCDC_RMCR = RMCR_LCDC_EN;
+
+}
+
+int
+board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_arch_number = 470;
+	gd->bd->bi_boot_params = 0x08000100;
+serial_init();
+	logo_init();
+	return 0;
+}
+
+int
+dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+#if ( CONFIG_NR_DRAM_BANKS > 0 )
+	gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1;
+	gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE;
+#endif
+	return 0;
+}
+
+/**
+ * show_boot_progress: - indicate state of the boot process
+ *
+ * @param status: Status number - see README for details.
+ *
+ */
+
+void
+show_boot_progress(int status)
+{
+	/* We use this as a hook to disable serial ports just before booting
+	 * This way we suppress the "uncompressing linux..." message
+	 */
+#ifdef CONFIG_SILENT_CONSOLE
+	if( status == 8) {
+		if( getenv("silent") != NULL ) {
+			*(volatile unsigned long *)0x206080 &= ~1;
+			*(volatile unsigned long *)0x207080 &= ~1;
+		}
+	}
+#endif
+	return;
+}
diff --git a/board/mx1fs2/u-boot.lds b/board/mx1fs2/u-boot.lds
new file mode 100644
index 0000000..5076303
--- /dev/null
+++ b/board/mx1fs2/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+		cpu/arm920t/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/board/netphone/phone_console.c b/board/netphone/phone_console.c
index dd59969..408ada0 100644
--- a/board/netphone/phone_console.c
+++ b/board/netphone/phone_console.c
@@ -326,7 +326,6 @@
 int drv_phone_init(void)
 {
 	device_t console_dev;
-	char *penv;
 
 	console_init();
 
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index a784e34..1aed61b 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -256,11 +256,13 @@
 	long dram_size = 0;
 	extern long spd_sdram (void);
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#if 0
 #if !defined(CONFIG_RAM_AS_FLASH)
 	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
 	sys_info_t sysinfo;
 	uint temp_lbcdll = 0;
 #endif
+#endif /* 0 */
 #if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
 	volatile ccsr_gur_t *gur= &immap->im_gur;
 #endif
@@ -279,7 +281,7 @@
 	dram_size = fixed_sdram ();
 #endif
 
-#if XXX
+#if 0
 #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
 	get_sys_info(&sysinfo);
 	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile
new file mode 100644
index 0000000..212efcc
--- /dev/null
+++ b/board/scb9328/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= scb9328.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/scb9328/config.mk b/board/scb9328/config.mk
new file mode 100644
index 0000000..8d1d79a
--- /dev/null
+++ b/board/scb9328/config.mk
@@ -0,0 +1,10 @@
+#
+# This config file is used for compilation of scb93328 sources
+#
+# You might change location of U-Boot in memory by setting right TEXT_BASE.
+# This allows for example having one copy located at the end of ram and stored
+# in flash device and later on while developing use other location to test
+# the code in RAM device only.
+#
+
+TEXT_BASE = 0x08f00000
diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
new file mode 100644
index 0000000..1b56f8c
--- /dev/null
+++ b/board/scb9328/flash.c
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This code was inspired by Marius Groeger and Kyle Harris code
+ * available in other board ports for U-Boot
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ */
+
+#include <common.h>
+#include "intel.h"
+
+
+/*
+ * This code should handle CFI FLASH memory device. This code is very
+ * minimalistic approach without many essential error handling code as well.
+ * Because U-Boot actually is missing smart handling of FLASH device,
+ * we just set flash_id to anything else to FLASH_UNKNOW, so common code
+ * can call us without any restrictions.
+ * TODO: Add CFI Query, to be able to determine FLASH device.
+ * TODO: Add error handling code
+ * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
+ *       hopefully may work with other configurations.
+ */
+
+#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
+#  define FLASH_BUS vu_char
+#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
+#    define FLASH_CMD( x ) x
+#  else
+#    error "With 8bit bus only one chip is allowed"
+#  endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
+#  define FLASH_BUS vu_short
+#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
+#    define FLASH_CMD( x ) x
+#  elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+#    define FLASH_CMD( x ) (( x << 8 )| x )
+#  else
+#    error "With 16bit bus only 1 or 2 chip(s) are allowed"
+#  endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
+#  define FLASH_BUS vu_long
+#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
+#    define FLASH_CMD( x ) x
+#  elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+#    define FLASH_CMD( x ) (( x << 16 )| x )
+#  elif ( SCB9328_FLASH_INTERLEAVE == 4 )
+#    define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
+#  else
+#    error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
+#  endif
+
+#else
+#  error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
+#endif
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static FLASH_BUS flash_status_reg (void)
+{
+
+	FLASH_BUS *addr = (FLASH_BUS *) 0;
+
+	*addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+
+	return *addr;
+}
+
+static int flash_ready (ulong timeout)
+{
+	int ok = 1;
+
+	reset_timer_masked ();
+	while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
+		   FLASH_CMD (CFI_INTEL_SR_READY)) {
+		if (get_timer_masked () > timeout && timeout != 0) {
+			ok = 0;
+			break;
+		}
+	}
+	return ok;
+}
+
+#if ( CFG_MAX_FLASH_BANKS != 1 )
+#  error "SCB9328 platform has only one flash bank!"
+#endif
+
+
+ulong flash_init (void)
+{
+	int i;
+	unsigned long address = SCB9328_FLASH_BASE;
+
+	flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
+	flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+	flash_info[0].flash_id = INTEL_MANUFACT;
+	memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+
+	for (i = 0; i < CFG_MAX_FLASH_SECT; i++) {
+		flash_info[0].start[i] = address;
+#ifdef SCB9328_FLASH_UNLOCK
+		/* Some devices are hw locked after start. */
+		*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
+		*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
+		flash_ready (0);
+		*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+#endif
+		address += SCB9328_FLASH_SECT_SIZE;
+	}
+
+	flash_protect (FLAG_PROTECT_SET,
+				   CFG_FLASH_BASE,
+				   CFG_FLASH_BASE + monitor_flash_len - 1,
+				   &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+				   CFG_ENV_ADDR,
+				   CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return SCB9328_FLASH_BANK_SIZE;
+}
+
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	printf (" Intel vendor\n");
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if (!(i % 5)) {
+			printf ("\n");
+		}
+
+		printf (" %08lX%s", info->start[i],
+				info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+}
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, non_protected = 0, sector;
+	int rc = ERR_OK;
+
+	FLASH_BUS *address;
+
+	for (sector = s_first; sector <= s_last; sector++) {
+		if (!info->protect[sector]) {
+			non_protected++;
+		}
+	}
+
+	if (!non_protected) {
+		return ERR_PROTECTED;
+	}
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();
+
+
+	/* Start erase on unprotected sectors */
+	for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
+		if (info->protect[sector]) {
+			printf ("Protected sector %2d skipping...\n", sector);
+			continue;
+		} else {
+			printf ("Erasing sector %2d ... ", sector);
+		}
+
+		address = (FLASH_BUS *) (info->start[sector]);
+
+		*address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
+		*address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
+		if (flash_ready (CFG_FLASH_ERASE_TOUT)) {
+			*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+			printf ("ok.\n");
+		} else {
+			*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+			rc = ERR_TIMOUT;
+			printf ("timeout! Aborting...\n");
+			break;
+		}
+		*address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+	}
+	if (ctrlc ())
+		printf ("User Interrupt!\n");
+
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);
+	if (flag) {
+		enable_interrupts ();
+	}
+
+	return rc;
+}
+
+static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
+{
+	FLASH_BUS *address = (FLASH_BUS *) dest;
+	int rc = ERR_OK;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*address & data) != data) {
+		return ERR_NOT_ERASED;
+	}
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+
+	flag = disable_interrupts ();
+
+	*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+	*address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
+	*address = data;
+
+	if (!flash_ready (CFG_FLASH_WRITE_TOUT)) {
+		*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+		rc = ERR_TIMOUT;
+		printf ("timeout! Aborting...\n");
+	}
+
+	*address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+	if (flag) {
+		enable_interrupts ();
+	}
+
+	return rc;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong read_addr, write_addr;
+	FLASH_BUS data;
+	int i, result = ERR_OK;
+
+
+	read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
+	write_addr = read_addr;
+	if (read_addr != addr) {
+		data = 0;
+		for (i = 0; i < sizeof (FLASH_BUS); i++) {
+			if (read_addr < addr || cnt == 0) {
+				data |= *((uchar *) read_addr) << i * 8;
+			} else {
+				data |= (*src++) << i * 8;
+				cnt--;
+			}
+			read_addr++;
+		}
+		if ((result = write_data (info, write_addr, data)) != ERR_OK) {
+			return result;
+		}
+		write_addr += sizeof (FLASH_BUS);
+	}
+	for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
+		if ((result = write_data (info, write_addr,
+								  *((FLASH_BUS *) src))) != ERR_OK) {
+			return result;
+		}
+		write_addr += sizeof (FLASH_BUS);
+		src += sizeof (FLASH_BUS);
+	}
+	if (cnt > 0) {
+		read_addr = write_addr;
+		data = 0;
+		for (i = 0; i < sizeof (FLASH_BUS); i++) {
+			if (cnt > 0) {
+				data |= (*src++) << i * 8;
+				cnt--;
+			} else {
+				data |= *((uchar *) read_addr) << i * 8;
+			}
+			read_addr++;
+		}
+		if ((result = write_data (info, write_addr, data)) != 0) {
+			return result;
+		}
+	}
+	return ERR_OK;
+}
diff --git a/board/scb9328/intel.h b/board/scb9328/intel.h
new file mode 100644
index 0000000..77498b6
--- /dev/null
+++ b/board/scb9328/intel.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2002 ETC s.r.o.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Written by Marcel Telka <marcel@telka.sk>, 2002.
+ *
+ * Documentation:
+ * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
+ *     28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
+ * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
+ *     28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
+ *
+ * This file is taken from OpenWinCE project hosted by SourceForge.net
+ *
+ */
+
+#ifndef	FLASH_INTEL_H
+#define	FLASH_INTEL_H
+
+#include <common.h>
+
+/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
+
+#define	CFI_INTEL_CMD_READ_ARRAY		0xFF	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_READ_IDENTIFIER		0x90	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_READ_QUERY		0x98	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_READ_STATUS_REGISTER	0x70	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_CLEAR_STATUS_REGISTER	0x50	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_PROGRAM1			0x40	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_PROGRAM2			0x10	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_WRITE_TO_BUFFER		0xE8	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_CONFIRM			0xD0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_BLOCK_ERASE		0x20	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_SUSPEND			0xB0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_RESUME			0xD0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_LOCK_SETUP		0x60	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_LOCK_BLOCK		0x01	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_UNLOCK_BLOCK		0xD0	/* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_LOCK_DOWN_BLOCK		0x2F	/* 28FxxxK3, 28FxxxK18 */
+
+/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
+
+#define	CFI_INTEL_SR_READY			1 << 7	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_ERASE_SUSPEND		1 << 6	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_ERASE_ERROR		1 << 5	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_PROGRAM_ERROR		1 << 4	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_VPEN_ERROR			1 << 3	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_PROGRAM_SUSPEND		1 << 2	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_BLOCK_LOCKED		1 << 1	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_BEFP			1 << 0	/* 28FxxxK3, 28FxxxK18 */
+
+/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
+
+#define	CFI_CHIP_INTEL_28F320J3A		0x0016
+#define	CFI_CHIPN_INTEL_28F320J3A		"28F320J3A"
+#define	CFI_CHIP_INTEL_28F640J3A		0x0017
+#define	CFI_CHIPN_INTEL_28F640J3A		"28F640J3A"
+#define	CFI_CHIP_INTEL_28F128J3A		0x0018
+#define	CFI_CHIPN_INTEL_28F128J3A		"28F128J3A"
+
+/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
+
+#define	CFI_CHIP_INTEL_28F640K3			0x8801
+#define	CFI_CHIPN_INTEL_28F640K3		"28F640K3"
+#define	CFI_CHIP_INTEL_28F128K3			0x8802
+#define	CFI_CHIPN_INTEL_28F128K3		"28F128K3"
+#define	CFI_CHIP_INTEL_28F256K3			0x8803
+#define	CFI_CHIPN_INTEL_28F256K3		"28F256K3"
+#define	CFI_CHIP_INTEL_28F640K18		0x8805
+#define	CFI_CHIPN_INTEL_28F640K18		"28F640K18"
+#define	CFI_CHIP_INTEL_28F128K18		0x8806
+#define	CFI_CHIPN_INTEL_28F128K18		"28F128K18"
+#define	CFI_CHIP_INTEL_28F256K18		0x8807
+#define	CFI_CHIPN_INTEL_28F256K18		"28F256K18"
+
+#endif /* FLASH_INTEL_H */
diff --git a/board/scb9328/memsetup.S b/board/scb9328/memsetup.S
new file mode 100644
index 0000000..be5650a
--- /dev/null
+++ b/board/scb9328/memsetup.S
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/imx-regs.h>
+
+.globl memsetup
+memsetup:
+
+	mov	r10, lr
+
+/* Change PERCLK1DIV to 14 ie 14+1 */
+	ldr		r0,	=PCDR
+	ldr		r1,	=CFG_PCDR_VAL
+	str		r1,   [r0]
+
+/* set MCU PLL Control Register 0 */
+
+	ldr		r0,	=MPCTL0
+	ldr		r1,	=CFG_MPCTL0_VAL
+	str		r1,   [r0]
+
+/* set mpll restart bit */
+	ldr		r0, =CSCR
+	ldr		r1, [r0]
+	orr		r1,r1,#(1<<21)
+	str		r1, [r0]
+
+	mov		r2,#0x10
+1:
+	mov		r3,#0x2000
+2:
+	subs	r3,r3,#1
+	bne		2b
+
+	subs	r2,r2,#1
+	bne		1b
+
+/* set System PLL Control Register 0 */
+
+	ldr		r0,	=SPCTL0
+	ldr		r1,	=CFG_SPCTL0_VAL
+	str		r1,   [r0]
+
+/* set spll restart bit */
+	ldr		r0, =CSCR
+	ldr		r1, [r0]
+	orr		r1,r1,#(1<<22)
+	str		r1, [r0]
+
+	mov		r2,#0x10
+1:
+	mov		r3,#0x2000
+2:
+	subs	r3,r3,#1
+	bne		2b
+
+	subs	r2,r2,#1
+	bne		1b
+
+	ldr		r0,   =CSCR
+	ldr		r1,   =CFG_CSCR_VAL
+	str		r1,   [r0]
+
+/* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
+ *this.....
+ *
+ * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
+ * register 1, this stops it using the output of the PLL and thus runs at the
+ * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
+ * use the value set in the CM_OSC registers...regardless of what you set it
+ * too!  Thus, although i thought i was running at 140MHz, i'm actually running
+ * at 40!..
+
+ * Slapping this into my bootloader does the trick...
+
+ * MRC p15,0,r0,c1,c0,0    ; read core configuration register
+ * ORR r0,r0,#0xC0000000   ; set asynchronous clocks and not fastbus mode
+ * MCR p15,0,r0,c1,c0,0    ; write modified value to core configuration
+ * register
+ */
+	MRC p15,0,r0,c1,c0,0
+	ORR r0,r0,#0xC0000000
+	MCR p15,0,r0,c1,c0,0
+
+	ldr		r0,	=GPR(0)
+	ldr		r1,	=CFG_GPR_A_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GIUS(0)
+	ldr		r1,	=CFG_GIUS_A_VAL
+	str		r1,   [r0]
+
+/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */
+
+	ldr		r0,	=FMCR
+	ldr		r1,	=CFG_FMCR_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS0U
+	ldr		r1,	=CFG_CS0U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS0L
+	ldr		r1,	=CFG_CS0L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS1U
+	ldr		r1,	=CFG_CS1U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS1L
+	ldr		r1,	=CFG_CS1L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS2U
+	ldr		r1,	=CFG_CS2U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS2L
+	ldr		r1,	=CFG_CS2L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS3U
+	ldr		r1,	=CFG_CS3U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS3L
+	ldr		r1,	=CFG_CS3L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS4U
+	ldr		r1,	=CFG_CS4U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS4L
+	ldr		r1,	=CFG_CS4L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS5U
+	ldr		r1,	=CFG_CS5U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS5L
+	ldr		r1,	=CFG_CS5L_VAL
+	str		r1,   [r0]
+
+/* SDRAM Setup */
+
+	ldr		r0, =SDCTL0
+	ldr		r1, =PRECHARGE_CMD
+	str		r1,   [r0]
+
+	ldr		r0, =0x08200000
+	ldr		r1, =0x0 /* Issue Precharge all Command */
+	str		r1,   [r0]
+
+	ldr		r0, =SDCTL0
+	ldr		r1, =AUTOREFRESH_CMD
+	str		r1,   [r0]
+
+	ldr		r0, =0x08000000
+	ldr		r1, =0x0 /* Issue AutoRefresh Command */
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+
+	ldr		r0, =SDCTL0
+	ldr		r1, =0xb10a8300
+	str		r1,   [r0]
+
+	ldr		r0, =0x08223000 /* CAS Latency 2 */
+	ldr		r1, =0x0   /* Issue Mode Register Command, Burst Length = 8 */
+	str		r1,   [r0]
+
+	ldr		r0, =SDCTL0
+	ldr		r1, =0x810a8200 /* Set to Normal Mode CAS 2 */
+	str		r1,   [r0]
+
+	mov	pc,r10
diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c
new file mode 100644
index 0000000..a1fe0ae
--- /dev/null
+++ b/board/scb9328/scb9328.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+int board_init( void ){
+  DECLARE_GLOBAL_DATA_PTR;
+
+  gd->bd->bi_arch_number = 508;
+  gd->bd->bi_boot_params = 0x08000100;
+
+  return 0;
+}
+
+int dram_init( void ){
+  DECLARE_GLOBAL_DATA_PTR;
+
+#if ( CONFIG_NR_DRAM_BANKS > 0 )
+  gd->bd->bi_dram[0].start = SCB9328_SDRAM_1;
+  gd->bd->bi_dram[0].size  = SCB9328_SDRAM_1_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 1 )
+  gd->bd->bi_dram[1].start = SCB9328_SDRAM_2;
+  gd->bd->bi_dram[1].size  = SCB9328_SDRAM_2_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 2 )
+  gd->bd->bi_dram[2].start = SCB9328_SDRAM_3;
+  gd->bd->bi_dram[2].size  = SCB9328_SDRAM_3_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 3 )
+  gd->bd->bi_dram[3].start = SCB9328_SDRAM_4;
+  gd->bd->bi_dram[3].size  = SCB9328_SDRAM_4_SIZE;
+#endif
+
+  return 0;
+}
+
+/**
+ * show_boot_progress: - indicate state of the boot process
+ *
+ * @param status: Status number - see README for details.
+ *
+ * The CSB226 does only have 3 LEDs, so we switch them on at the most
+ * important states (1, 5, 15).
+ */
+
+void show_boot_progress (int status)
+{
+	return;
+}
diff --git a/board/scb9328/u-boot.lds b/board/scb9328/u-boot.lds
new file mode 100644
index 0000000..5076303
--- /dev/null
+++ b/board/scb9328/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+		cpu/arm920t/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index 4ec7b96..1a35187 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -265,7 +265,7 @@
 void video_get_info_str (int line_number, char *info)
 {
 	if (line_number == 1) {
-#if CONFIG_MGT5100
+#ifdef CONFIG_MGT5100
 		strcpy (info, " Total5100");
 #elif CONFIG_TOTAL5200_REV==1
 		strcpy (info, " Total5200");